3
FIREPLACE INSTALLATION
R
ECOMMENDATIONS TO
T
HE
I
NSTALLER
1.
Before starting your fireplace installation, read these safety tips and installation instructions carefully to be sure
you understand them completely. Failure to follow them could cause a fireplace malfunction resulting in
serious bodily injury and / or property damage.
2.
Always check your local building codes. The installation must comply with their regulations.
3.
These fireplaces can use an ASHT+ / , S-2100+ / or AC chimney system of the inside
diameter recommended by Security Chimneys International Ltd (SE36 and SB36: 7" inside diameter, SB42 and
SR42: 8" inside diameter)
4.
To maintain top efficiency and to prevent build-up of soot and creosote, inspect and clean the chimney
periodically during the heating season.
5.
Ensure an adequate supply of combustion air to prevent possible hazards due to poor combustion and to avoid
affecting other fuel burning appliances.
6.
Your Security fireplace has been tested and listed to UL and ULC standards, to be installed in accordance with
this brochure by Warnock Hershey International, Inc.
7.
These instructions are written to give you an outline for a fast, safe installation and trouble-free operation.
8.
Failure to use parts manufactured by Security Fireplace or variations in techniques and construction materials
described in this installation manual may create a serious fire hazard; it may void the Security Fireplace
warranty and will void the WHI listing.
9.
The Security fireplace features optional glass doors, outside combustion air kit, blowers and decorative trims
and panels.
T
OOLS AND
B
UILDING
S
UPPLIES
N
ORMALLY
R
EQUIRED
Tools should include:
If gas pipe is used:
Building supplies:
Phillips screwdriver
Pipe wrench
Framing materials
Slot style screwdriver
Pipe cutter
Wall finishing materials
Hammer
Pipe threader
Caulking materials
Saw and/or Sabersaw
Pipe joint compound
(non-combustible)
Level
Pipe key valve
Fireplace front
Measuring Tape
(overlay material)
Plumb line
Hearth extension
Electric drill and bits
(non-combustible)
Pliers
Square
CAUTION
The most important areas of concern dealing with the installation of factory built fireplaces are clearances to
combustible materials, secure assembly of component parts, the height of the chimney system, the proper use of
accessory equipment and the techniques employed in using finishing materials applied to fireplace surrounds, hearth
extensions and wall coverings. Each of these topics will be covered in great detail throughout this manual.
PLEASE GIVE EACH OF THESE INSTRUCTIONS SPECIAL ATTENTION AS YOU PROGRESS WITH
YOUR INSTALLATION.
