Security Chimneys secure pellet, Installation Instructions Manual

10

Figure 10

Figure 11

3.

  If the flue exits on back of stove and an 

interior installation is desired (Figure 10):

A.  Place the appliance according to the 

manufacturer’s instructions.

B.  Connect the Tee Adapter or combine Tee 

with Cleanout and Pipe Adapter then seal and 

secure the Pipe Adapter to the back of the 

stove. 

C.  Continue to assemble Pipe Sections as 

described in Step 2.

4.

  If the flue exit is on the back of stove, and 

an exterior vertical installation or partial vertical 

installation is desired (Figure 11):

A.  Place the appliance according to 

manufacturer’s instructions. 

B.  Cut and frame a square opening in the 

wall as specified in Table 1. Secure Pellet can 

be installed with the standard Wall Thimble 

or Wall Thimble Air Intake Kit for through the 

wall installations. The Wall Thimble Air Intake 

Kit allows combustion air to be drawn through 

the framed Thimble opening, eliminating the 

need to cut another opening in wall. The small 

flex provided with this kit allows connection 

to the Pellet Stove combustion air inlet. Note 

that when installing the Wall Thimble Air 

Intake Kit, the pipe will not be centered within 

the framed opening. Loosely assemble both 

halves of the Wall Thimble onto Pipe Section. 

Connect the flexible hose with clamp to the 

exterior half of the Wall Thimble. Guide the 

flex through the opening in black interior half 

of Wall Thimble, gently pull the flex towards 

appliance (Figure 12), and if necessary trim 

SECURE PELLET

PIPE