Tees
Insulated Tee Cap (Twist-Lock)
Equipped with a Twist-Lock system, it makes it possible to seal the base of an
insulated tee when an adjustable wall support (SME or XSME) is used. It can be
removed, providing easy access for chimney maintenance and inspection. Its
insulation prevents the cooling of chimney gases, especially in exterior installations.
ASHT
Ref. TCI
Ø int.
5"
6"
7"
8"
10"
S2100
Ref. XTCI
Ø int.
6"
7"
8"
Drain Tee Cap
Fitted at the base of an insulated tee, it makes it possible to collect and drain
rainwater and condensates. The drain tee cap connects to a drain (NPT 0 1").
Removable, it provides easy access for chimney maintenance or inspection. Must be
combined with an adjustable wall support only.
ASHT
Ref. TCP
Ø int.
6"
7"
8"
10"
Supports
Finishing Support
A
B
C
D
E
F
This part supports the chimney from a ceiling. Designed to connect to both double-
wall and single-wall stove pipe, it is enhanced by a decorative black finish. Fits
between standard 16"- on-center joists. Must be attached to a frame built from the
joists. (Refer to chart on pg. 4 or 8 for loadbearing capacity and size of openings.)
A finishing support is also available with a removable collar for 5" (5SFCA and 6"
(6SFCA) installations.
ASHT
Ref. SFC
Ø int. 5"
6"
7"
8"
A
12"
12"
14-3/8"
14-3/8"
B
5-1/4"
6-15/64"
7-1/4"
8-1/4"
C
20"
20"
20"
20"
D
5-1/2"
5-1/2"
5-1/2"
5-1/2"
E
3"
3"
3"
3"
F
2"
2"
2"
2"
S2100
Ref. XSFC
Ø int.
6"
7"
8"
A
14-3/8"
14-3/8"
14-3/8"
B
6-15/16" 7-1/4"
8-1/4"
C
20"
20"
20"
D
5-1/2"
5-1/2"
5-1/2"
E
3"
3"
3"
F
2"
2"
2"
800-361-4909 (US) | 800-667-3387 (Canada) 14
