-
45
SPECIFICATION
HDD CONFIGURATION
At the HDD menu,
Move the cursor to HDD CONFIGURATION using the , buttons.
Press the ENTER button when the cursor is on the HDD CONFIGURATION and the following screen appears.
Use the , , , buttons to move the cursor and use the (-), (+) buttons or jog dial to change the
value.
REC HDD INITIALIZE
At the HDD menu,
Move the cursor to REC HDD INITIALIZE using the , buttons.
Press the ENTER button when the cursor is on the REC HDD INITIALIZE and the following screen appears.
If you want to initialize, move the cursor to “YES” and then press the “ENTER” button.
If not, move the cursor to “NO” and then press the “ENTER” button.
To exit this screen, press the ESC button.
To exit this HDD menu, press the “ESC” button again.
HDD MODE
- REC: Normal and Event recording
- BACKUP: Only for backup
