7
Outside Antenna
English
4) Some examples of installation
1
2
3
4
In this case, the antenna is connected directly on the receiver TNT
or the television set. The power necessary (5 Volts) is then provided
by the receiver or the television set by activating this function in the
menu. The injector is not essential in this installation, it can any time
being used without connecting it to the sector like attenuator of signal
(potentiometer)
Here, the injector of tension will be used (not function power antenna
in the receiver or television set TNT). The injector is then connected
between the antenna and the device of reception. This one is also
connected to a power-socket using the adapter.
This plan represents an installation combining at the same time a
terrestrial reception and a satellite reception. Both antennas are then
connected by a mixer (with 2 passages of current).To redistribute the
signals, it will be necessary to use a case to demixer (with 2 passages
of current). Quite as in the case n°1, the supply of the antenna will be
made by the device of reception.
Here, the injector of tension will be used (not function power antenna
in the receiver or television set TNT). The injector is thus connected
between the TERRESTRIAL output of the demixer and the device of
reception. This one is also connected to a power-socket using the
adapter.
Coaxiale plug
(not provided)
«F» connector
(not provided)
Coaxiale cable
(not provided)
Waterproof cap
(provided)
Injector /
Attenuator
Power in the coaxial cable
(5 - 24 Vcc)
Mixer Satellite / Terrestrial 2CC
Demixer Satellite / Terrestrial 2CC
Power-socket
