TriSonus10 dp
6 Technical specifications
15
6
Technical specifications
Speaker Components
2x5“ Nd (1,5“ VC) / 3x1“ Nd (1,1“ VC)
Description
Multi Media Column
Amp Power
LF: 280 W AES / 110-230 V
HF: 175 W AES / 110-230 V
Rated Current
0,2 A @ 230 V
SPL
(Peak @ 1m)
118 dB
Max. Input Signal
25 dBu
DSP
HDLM FPGA Processing 32 bit floating point
AD / DA
24 bit / 96 kHz
Latency
0,8 ms (analog in to analog out)
Usable Range
(-6dB)
50 Hz - 20 kHz (-6dB)
Tuning Frequency
(excursion minimum)
55 Hz
X - Overpoint
(acoustical)
depends on preset
Coverage
(horizontal / vertical)
100° x 25°
Max. Splay Angle
- - -
Connectors
Neutrik XLR in
Neutrik PowerCon in
RJ45 (Ethercon)
Handles
- - -
Rigging
(flying points)
2x M10, 14x M5, 2x fixing holes
Weight
8,5 kg
Size
(height x width x depth)
93,0 x 18,0 x 13,7 cm
Order No.
00120/dp
The technical data sheet and further information about possible applications for the system and
available accessories can be downloaded at the following Internet address:
https://www.seeburg.net/download_getfile.php?file=downloads/06-
Datenblaetter/TriSonus/TriSonus10-dp_Datenblatt_dt.pdf
This manual applies only to systems fitted with the
DPLM
-DSP Con-
troller.
The version fitted with the
DPLM
-DSP Controller can be identified by
the control panel located above the XLR connectors.
