TriSonus10 dp
5 Operation
10
5.3
Setting level
After switching on and starting up, the TriSonus 10 dp is in Status
Mode. Pressing the Mode button once selects the Level Mode, in
which you can adjust the output volume in 3 dB steps. Seven different
values between +6 dB and -12 dB are available, with 0 dB being the
standard setting. The setting is made using the Set button. The green
LED above on the left indicates that you are in Level Mode, whereby
the four vertically arranged LEDs (now lighting up green) indicate the
respectively set value. If two adjacent LEDs light up, the intermediate
value of the printed levels is set.
Level setting options
+ 6 dB
+ 3 dB
- 3 dB
- 9 dB
0 dB
- 6 dB
- 12 dB
5.4
Recalling presets
After switching on and starting up, the TRISONUS 10 DP dp is in Status Mode. Pressing the Mode
button twice to selects the Preset Mode. Three different presets can be called up using the set
button. The green LED above on the right indicates that you are in Preset Mode. The four vertical
LEDs show the selected preset during the selection. If the lower LED lights up in addition to one of
the three LEDs above, the Soft Mode is activated. The following representations show examples of
settings:
