TriSonus10 dp
5 Operation
13
5.4.3
Preset Bank 3 – In-Wall-Mounting
This Preset Bank is to be selected when the TriSonus 10 dp is mounted directly
in
a wall. The pre-
sets are optimized in such a way that the mounting wall besides the TriSonus 10 dp is regarded as
a acoustically hard reflection surface.
Flat:
Preset for single application without any additional subwoofer.
HP:
Flat preset with a higher cut-off frequency for the high-pass filter for
combination with a subwoofer. The higher cut-off frequency allows a
higher maximum sound pressure level to be achieved.
Low-Boost:
Based on the preset Flat with a low-frequency boost. This setting is
useful in full-range applications in which strong bass reproduction is
required, but a subwoofer cannot be used. The achievable low-
frequency level is, however, limited.
Soft Mode:
Additional reduction at the presence frequency range. The Soft Mode
operates independently of which of the three presets is selected and
is recommended for higher listening volumes.
