X2 dp
5 Operation
10
5.3
Setting level
After switching on and starting up, the X2 dp is in Status Mode. Press-
ing the Mode button once selects the Level Mode, in which you can
adjust the output volume in 3 dB steps. Seven different values between
+6 dB and -12 dB are available, with 0 dB being the standard setting.
The setting is made using the Set button. The green LED above on the
left indicates that you are in Level Mode, whereby the four vertically
arranged LEDs (now lighting up green) indicate the respectively set
value. If two adjacent LEDs light up, the intermediate value of the
printed levels is set.
Level setting options
+ 6 dB
+ 3 dB
- 3 dB
- 9 dB
0 dB
- 6 dB
- 12 dB
