X2 dp
6 Technical specifications
13
6
Technical specifications
Speaker Components
8“ Nd (2,5“ VC) / 1“ Nd (1,7“ VC)
Description
Multifunctional Coaxial Sound System
Amp Power
LF: 500 W AES / 110-230 V
HF: 220 W AES / 110-230 V
Rated Current
0,4 A @ 230 V
SPL
(Peak @ 1m)
124 dB
Max. Input Signal
25 dBu
DSP
HDLM FPGA Processing 32 bit floating point
AD / DA
24 bit / 96 kHz
Latency
0,8 ms (analog in to analog out)
Usable Range
(-6dB)
70 Hz - 19 kHz (-6dB)
Tuning Frequency
(excursion minimum)
80 Hz
X - Overpoint
(acoustical)
depends on preset
Coverage
(horizontal / vertical)
90° x 60° - rotatable
Max. Splay Angle
- - -
Connectors
Neutrik XLR in
Neutrik PowerCon in
RJ45 (Ethercon)
Handles
1 x
Rigging
(flying points)
3x M10
35 mm pole mount
Weight
8 kg
Size
(height x width x depth)
37,5 x 25,0 x 25,0 cm
Order No.
01091/dp
The technical data sheet and further information about possible applications for the system and
available accessories can be downloaded at the following Internet address:
https://www.seeburg.net/download_getfile.php?file=downloads/06-Datenblaetter/X-Serie/X2-
This manual applies only to systems fitted with the
DPLM
-DSP Con-
troller.
The version fitted with the
DPLM
-DSP Controller can be identified by
the control panel located above the XLR connectors.
