X6 dp
2 Foreword
3
2
Foreword
The X6 dp is a multi-functional coaxial loudspeaker featuring an integrated digital amplifier provid-
ing 1500 Watt + 400 Watt @ 4 Ohms (AES) and a DSP controller. The horn can be rotated for
monitor applications or to suit horizontal installation. Various pre-configured presets and volume
settings are available for selection.
The integrated DSP controller is based on the same operating principle as the stand-alone control-
lers HDLM 8 and DSP 2.6 and contains additional features. A mere 0.8 ms latency (from analogue
input to output) is achieved through the use of a 96 kHz sample rate. The excellent signal to noise
ratio is a further feature of the DSP controller. Electronic simulation of a transformer balanced input
provides additional protection against hum and buzz caused for example by external interference.
High grade electronic components from the industrial sector and first-class circuit design result in a
robust device with excellent audio characteristics and minimize disruptive noise. In addition to the
analog audio transmission via a conventional LF line, there is also the option of connecting to a
digital audio and control network.
The default state of the integrated DSP controller is the standard configuration as described in this
manual. Custom presets can be installed by the user, but must be programmed with the LPI (Loud-
speaker Programming Interface) by the manufacturer. The preset file is a custom audio file which is
simply played into the audio input of the controller. In this manner, individual configurations can be
created, for instance to accommodate the specific requirements of an installation project. Further-
more, should you ever be unsure as to the integrity of the DSP configuration of your controller, you
can obtain a fresh default file from SEEBURG acoustic line and re-install the original factory pre-
sets yourself. Efficient and intelligent limiter functions provide optimal protection without sacrificing
any of the potential of the system.
If you would like further information about SEEBURG acoustic line products, or have any com-
ments or suggestions regarding this handbook or the product, you can contact us here:
SEEBURG acoustic line Produktions- und Vertriebsgesellschaft mbH
Auweg 32
89231 Senden
07307 / 9700
– 0
