A6 dp
SEEBURG acoustic line
8
Accessing presets
By pressing the MODE button twice you will gain access to the Preset mode.
Three different presets and an additional Soft mode can be selected via the
SET button:
•
Flat :
This setting facilitates a linear frequency response. Frequencies
below 100 Hz are not boosted electronically. This preset is usually used when
the system is being operated without a subwoofer.
•
High-pass filter (HP):
Use in combination with subwoofers. Low
frequencies are lowered.
•
Voice:
By raising of the level within the presence and treble range slightly
and a lowering the low-mid range, particularly assertive voice reproduction is
achieved. This setting is recommended when using dynamic microphones (e.g.
Shure SM58).
Boost:
Same setting as Flat mode, but with increased bass response. This
setting is recommended for full-range applications when a balanced bass
response is needed although subwoofers are not being used. The attainable
level within the bass range is, however, limited
Lock function:
If the SET and MODE buttons are simultaneously pressed for
more than three seconds, the operational function is disabled. Press the
buttons again in the same way to release the lock.
