G Sub 1001 dp+
2 Foreword
3
2
Foreword
The G Sub 1001 dp+ is a multi-functional premium class subwoofer with an integrated digital ampli-
fier providing 2x 500 Watt @ 4 Ohm (AES) and a DSP controller.
The 10” long-excursion driver is
powered by one of the amplifier channels, and the other channel is available to power external
passive loudspeakers connected to the SpeakON out connector. According to requirements, mid-
high systems (e. g. TS Nano or i4) or an additional subwoofer (e. g. G Sub 1001) can be con-
nected. Various pre-configured presets and level settings are available for selection.
The integrated DSP controller is based on the same operating principle as the stand-alone control-
lers HDLM 8 and DSP 2.6. A mere 0.8 ms latency (from analogue input to output) is achieved
through the use of a 96 kHz sample rate. The excellent signal to noise ratio is a further feature of
the DSP controller. Electronic simulation of a transformer balanced input provides additional pro-
tection against hum and buzz caused for example by external interference. High grade electronic
components from the industrial sector and first-class circuit design result in a robust device with
excellent audio characteristics and minimize disruptive noise.
The default state of the integrated DSP controller is the standard configuration as described in this
manual. Custom presets can be installed by the user, but must be programmed with the LPI (Loud-
speaker Programming Interface) by the manufacturer. The preset file is a custom audio file which is
simply played into the audio input of the controller. In this manner, individual configurations can be
created, for instance to accommodate the specific requirements of an installation project. Further-
more, should you ever be unsure as to the integrity of the DSP configuration of your controller, you
can obtain a fresh default file from SEEBURG acoustic line and re-install the original factory pre-
sets yourself. Efficient and intelligent limiter functions provide optimal protection without sacrificing
any of the potential of the system.
If you would like further information about SEEBURG acoustic line products, or have any com-
ments or suggestions regarding this handbook or the product, you can contact us here:
SEEBURG acoustic line Produktions- und Vertriebsgesellschaft mbH
Auweg 32
89231 Senden
07307 / 9700
– 0
