G Sub 1001 dp+
3 Safety instructions
4
3
Safety instructions
Acoustic
Even a low input level can result in a sound pressure level at the
loudspeaker which can be damaging to your hearing. Do not remain
in close proximity to the loudspeaker when it is being operated. Use
hearing protection. Observe all relevant Health and Safety and Envi-
ronmental Protection regulations.
Mechanical
Movable parts and falling objects during installation and de-rigging
can cause serious injury. Observe at all times all relevant Health and
Safety regulations and regulations on the installation and operation of
PA systems.
Magnetic und electrical
Loudspeakers generate a magnetic field even without a source of
power connected. This can damage or destroy magnetic storage
devices. The PowerCon loop-through connector is under power when
the device is in operation. Observe all relevant safety regulations at
all times.
General safety precautions
The installation and de-rigging of this equipment should only be car-
ried out by appropriately qualified and experienced personnel, and
according to all relevant safety regulations. Find out about the appli-
cable regulations in the country you work in and comply with the re-
spective regulations.
Do not operate the loudspeaker if you have any doubts about the
safety of doing so, or if the loudspeaker shows any signs of faulty
operation. There are no user serviceable parts inside the device. For
repairs, contact your dealer or a qualified service technician.
The loudspeaker is a class 1 device requiring a 230 V / 50 Hz power
connection with earth contact.
