G3 dp
SEEBURG acoustic line
3
Foreword
The G3 dp with integrated 2x1500 Watt digital amplifier electronics and DSP
controller houses six 8” low-mid drivers and three 1.4” hf-drivers, using the
same technology as the Galeo line array. Unlike the Galeo, each G3 has a
fixed vertical dispersion of 20°. Due to the high acoustical output from 80Hz on,
it can be combined with the G-Sub or 2x 18” or even 2x 21” subwoofers.
The tilt and pivot frame included as standard facilitates simple alignment of the
system. Both, ground stacked and flown applications are possible.
High-grade electronic components from the industrial sector and a first-class
circuit design ensure excellent audio quality with low distortion and effectively
minimise static noise. Highly efficient and “intelligent” limiter systems ensure
optimum protection against overload, without restricting the possibilities offered
by this high-performance sound system.
If you would like any additional information on or have any suggestions
pertaining to this manual, please contact:
SEEBURG acoustic line Produktions- und Vertriebsgesellschaft mbH
Auweg 32
89250 Senden
07307 / 9700 – 0
www.seeburg.net
info@seeburg.net
Technical data are subject to change.
