G3 dp
SEEBURG acoustic line
8
Part 2 – Operation
System start-up
The previously selected setting is maintained when the equipment is switched
on. The system is then in Status mode. If the red Mute LED lights up according
to the previous setting, there is no signal being transmitted. If the Set button is
pressed once, the mute function is deactivated, the Mute LED goes off and the
system transmits a signal.
Adjusting sound levels
By pressing the Mode button once you will gain access to the Level mode,
permitting adjustment of the volume in 3dB stages. Four different 3dB,
0 dB (standard), -3dB and –6 dB are available. Adjustment is effect via the SET
button. The green LED located above it indicates which mode you are currently
using, whereby the four vertically arranged LEDs (now green) indicate each
value set.
