SEEBURG acoustic line
4
Part 1 – General Information
Components
The Galeo system comprises the Galeo Cylindric Wave Units and a compatible
Galeo Sub bass extension of the same width and includes appropriate flying
hardware.
Die Galeo Cylindric Wave unit is to be understood as an individual element
within a line array sound system. In combination with several different units, a
cylindrical sound wave is emitted, especially within the mid and high ranges,
which has a longer throw than comparable omni-directional systems. The 3-
point flying hardware with ball lock pins allows simple and fast assembly,
facilitating curving angles between 0° and 7° in 1° stages.
The exclusive use of high-grade European-made components guarantees a
high maximum sound pressure level with even horizontal directivity and
excellent sound quality.
A Galeo unit is fitted with two 8“ low-mid drivers and one 1.4“ HF driver. The
acoustic crossover frequency is approximately 900 Hz.
The two-way active operation is effected via system amping.
The chassis, which is made of an aluminium and multilayered birch multiplex
composite is polyurea-coated, providing it with adequate protection against
rain. Likewise, all diaphragms have a special coating.
The flying fittings are made of powder-coated steel, which also renders them
weather resistant. However, after many years of use the coating of the fittings
can become damaged and a light rust film may form on the steel parts if
exposed to dampness for longer periods. Therefore, keep your Galeo system
dry at all times and treat all critical areas regularly with suitable care products.
The Galeo Sub features two 18“ cone drivers and covers a frequency range
from 35 Hz to 80 Hz.
