TSM Sub dp+
SEEBURG acoustic line
4
Safety instructions
Do not operate the TSM Sub dp+ if you have any concerns regarding safety or
if the loudspeaker box should malfunction. The equipment has no user-
serviceable parts inside. In the event of repair, please contact your dealer or
qualified personnel respectively.
Connect the TSM Sub dp+ to a 230V/50Hz grounded safety socket. The
equipment corresponds to protection class 1. In case of overload, a protective
element is activated which reliably protects the amplifier module and the DSP.
However, it must then be replaced by an authorised service centre.
Never open the equipment, as there are no user-serviceable parts inside.
Do not expose TSM Sub dp+ to rain and, if possible, do not operate the
speaker outside of a temperature range of -5°C to 40°C. Bear in mind that
strong thermal fluctuations result in the formation of condensate, therefore do
not operate the speaker until the speaker box has assumed the ambient
temperature. Do not switch the equipment off if it is being used in adverse
conditions.
In order to avoid overheating of the speaker chassis and the built-in amplifier
module, never operate the TSM Sub dp+ in the close vicinity of intense heat
sources and avoid direct sunlight.
After several hours of operation the housing (especially all-metal parts such as
the speaker stand flange and connection panel) can reach temperatures of up
to 40°C.
