Seedburo Equipment Company | 9000AG Manual Revision 1.0
5
Seedburo Model 9000AG Operating and Service Manual
Section 2
INDICATOR LED LIGHTS:
STABLE
: This light indicates when the scale is in motion (LED off) or is stable (LED on). When
placing a weight on the scale the LED should turn off until the weight reading stops
changing (thus stable) than the LED will Illuminate. LED should Illuminate when at
zero also.
NOTE: For the scale to function properly, example.. ZERO, PRINT,MEM
, % etc…
the SCALE MUST BE STABLE. Vibration and wind may cause instability.
9
: This light when illuminated indicates the number on the scale is measured in grams.
9000AG USER INTERFACE:
ZERO /CLEAR
: This switch allows the USER to Zero the scale reading. When you press and HOLD
the switch it will zero the stored weight in Memory.
MEM
: This switch allows the USER to store a weight in memory so the User can perform a
dockage test. See page 4 for dockage test procedure.
%
: This switch will perform a percentage reading by dividing the Memory/current weight.
This % can be displayed as %dockage or %good product. See PCr parameter on
page 5.
Lb/Bu
: This switch will allow the user to measure weight in Lb/Bu (pounds/bushel).
Kg/Hl
:
This switch will allow the user to measure weight in Kg/Hl (Kilo grams/Hectoliter).
g
:
This switch will change the weight reading back to grams.
9000AG User Interface