-5-
12A4A2-00007E-8
4-2
Display Specifications
Item
Specifications
Display
Type
7-inch Wide TFT LCD
Resolution
800(W) X 480(H)
Color
65,536 colors
Backlight
LED (not replaceable)
Brightness
310 cd/m
2
Backlight brightness adjustment*
1
Adjustable in 16 levels
Backlight life *
2
70,000 hours average
*1. 4 levels of adjustment is possible by a EMG tool.
*2. Time until brightness declines by 50% from the initial value at maximum brightness in ambient
temperature of 25
℃
.
4-3
Touch Screen Specification
Item
Specifications
Type
Projected capacitive
Input Type
Finger
Multi-touch
Two points
*
1
Operating life
Continuous typing (finger input):50 million times
*1. Application for two point simultaneous input must be created by customer.
Note: Touch screen operations will become unstable depending on the installation environment due to its
characteristics. In order to use it correctly, preform calibration for sensitivity sensor of touch screen when
building into a device.
Also, if at any time the touch screen operations become unstable due to changes in the setting
environment or installation, perform sensitivity sensor calibration.
If there is moisture on the touch screen surface, it may not operate properly.
When moisture is detected on the surface, please wipe it dry before use.
4-4
General Specification
Item
Specifications
Power
Rated voltage
24VDC
Voltage tolerance
24VDC ± 20%
Power consumption
15W or under
（
Typ. 7W
）
*
1
FG Connection
FG (Frame GND) and SG (Signal GND) are connected internally.
FG (Frame GND) and GND are not connected.
*1.
Power consumption of the unit only. Please consider the power consumption of the USB device when
using the USB.
Note: When gentle power source is used for rising and falling of power, it may not operate properly.
Also, when rebooting EMG7, leave it off for a while after turning off; do not turn the power back on
immediately. It may not start up accurately.
