SARK-110-ULM
User’s Manual
Rev 1.0 June 22
th
, 2019
- 19 -
© 2019, Melchor Varela
– EA4FRB
«Deep Sweep»
The Deep Sweep save function provides the capability of saving measurements with arbitrary
number of frequency points. In addition, this function enables a user programmable timeout for
the automatic start of measurements to be specified. This function is similar to the self-timer
function on cameras.
In order to use this function, first set the frequency and span range in any of the sweep modes
such as Scalar Chart, select Function «File» and then select «Deep Sweep».
The procedure is as follows:
Enter the file name.
Enter the number of frequency points.
Minimum value is 102 and maximum
value is 10000.