RB-See-184
Seeedstudio Grove Infrared Emitter
Grove - Infrared Emitter
Introduction
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an
Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its color
centered around 940nm. We can use the emitter not only to transmit data or commands, but also to
emulate remotes to control your home appliance using an Arduino. The Infrared Emitter can transmit
signals reliable up to 10 meters. Beyond 10 meters, the receiver may not get the signals.
Features
Grove compatible interface
940nm IR LED
Application Ideas
Remote control
Mechanic Dimensions
Mechanic Dimensions
20mm by 24mm. The IR LED extends by another 7.5mm beyond the PCB.
