28
IP App. Functions
IP Device Search
No.
Name
Description
①
Refresh
Touch this button to try the search again.
②
Ping IP Range
This is a method to search IP devices by using Ping and available for use after
entering the Start IP address and the End IP address. The greater the search
range is, the longer it may take to search the IP devices.
③
Search Results
The discovered IP cameras are displayed with their names and IP addresses.
The discovered information depends on the camera's brand.
Tap the search icon to start camera discovery as shown below.
All IP cameras will be searched automatically when entering this screen.
1
2
3
When the camera is not searched
When using unsupported protocol.
Non-ONVIF cameras may not be discovered. These cameras can be connected manually by RTSP. The RTSP address
depends on the camera brand and can be found in the camera instructions.
When using a wireless router.
When connecting the camera wirelessly, the network type must be changed to Wi-Fi. The router assigns IP to the camera
automatically via DHCP.
When the IP address is changed manually.
When changing IP address of the camera randomly, the camera may not be discovered. If you have forgot or lost the
camera IP address, initialize the camera manually to its factory default.
