Rostock MAX v2 Assembly Guide – 4thEd.
14 – Finishing the Top End
14.1 – Installing the Spool Holder
For this task, you'll need the following components:
The first step is going to be installing two #6-32 nylon lock nuts into the spool holder
brace as shown in Fig. 14.1-1.
Now install the brace into the inner spool holder
support. Make sure you've got the support oriented as I
show in the photo. Use a #6-32, 1” pan head screw to fix it
in place.
14 – Finishing the Top End – 109
Fig. 14.1-1: Spool holder brace done.
Fig. 14.1-2: Brace installed.