Rostock MAX v2 Assembly Guide – 4thEd.
[___] (14) #2-56, 5/8” Pan Head Phillips Machine screws. Used for LCD
mounting and end-stop switch mounting. [30650] (Combined Package)
[___] (14) 2-56 Finish Nuts. Used for LCD mounting and end-stop
switch mounting. [30642] (Combined Package)
[___] (8) #4, 3/8” Phillips Pan Head Sheet Metal screws. Used for LCD
sides and tower alignment stops. [30250]
[___] (12) M3x.5, 10mm Pan Head Machine screws. Used for
mounting the stepper motors. [30318]
[___] (18) #6 Stainless Steel Flat washers. Used on the 608 bearings
that go in the top & bottom T-Slot rails. [30450]
[___] (9) R4 (Small) Ball Bearings. Used in the belt idlers. [35008]
[___] (1) #10-32, 5/8” Socket Head Cap Screw. Used as a tap for the
#10-32 Nylon thumb screws. [29999]
2 – Visual Bill of Materials – 14