SEERS F23HT, Installation Manual

IMPORTANT SAFETY INFORMATION

THIS APPLIANCE MUST BE EARTHED, TO MAKE SURE EARTH WIRE AND 
HEATER UNIT HAVE PROPER GROUNDING IN HOUSEHOLD.

Earthing requirements

The earthing installation should be carried out in accordance with the local 
wiring regulation. Where EARTHING of the premises is not evident, it is 
necessary to run an EARTH CONDUCTOR and solidly connect an earth rod local 
to the installation. As it's a safety factor, earthing is essential and mandatory. 
It's an electrical connection between the exposed metallic parts of an electrical 
appliance or installation and the earth, regarded to have zero potential. Proper 
earthing provides an alternative and easy path for leakage or faulty current to 
flow. It ensures that any exposed conductive part of the appliance does not 
reach a dangerous level of potential or voltage that endangers the user's life. A 
proper earthing system should have least electrical resistance, good corrosion 
resistance and ability of dissipating high faulty current. 

Consideration should be given by the young, the elderly, the infirm or anyone 
inexperienced in the correct operation of the control as well as children should 
be supervised to ensure that they do not play with the appliances.

When the Shower is used by someone such as child, elderly person, sick person 
and physically handicapped person, the concern person is kindly requested to 
pay attention and check the shower temperature by using hand from time to 
time. User is advised to test and adjust the water temperature before bathing.

WARNING: Metallic / chromed hose and conductive control valve shall not be 

used.

Test the build-in RCD at least once a month.

The spray head shall be descaled regularly.

WARNING: Do not switch on the heater if there is a possibility that water in the 

heater is frozen.

WARNING:  Whenever there’s  a trip, switch OFF the incoming supply and turn ON 

again than press the reset button for returning to normal operation.

2