5
Bluetooth Connection
1. Turn the volume knob (5) to switch on the system and the Bluetooth LED indicator (4) is on
with flashing blue light. The unit will go into Pairing/Discoverable mode.
2. Turn on the Bluetooth function for the device you want to link to, and enable the search or
scan function to find the unit.
3. Select "TT-918" from the device list when it appears on your device screen.
4. After successfully pairing the unit with your Bluetooth device, the Bluetooth LED Indicator (4)
will stop flashing and remain lit in blue color.
5. If you want to connect the unit to another Bluetooth enabled device after you’ve already
successfully paired to another device, turn off the Bluetooth on the device that was
previously paired with the unit. The Bluetooth LED indicator will begin flashing, repeat step
2-4 above.
Note
: The unit may automatically reconnect to a previously linked
device that is in range, so
you may need to turn off the Bluetooth on any paired device first before going
through the above steps.
PLAY MUSIC FROM YOUR BLUETOOTH DEVICE WIRELESSLY TO THE UNIT
1. Select your favorite song, press the Play/Pause on your Bluetooth device to play or pause
the song from your Bluetooth device.
2. Press the skip forward/skip backward on your Bluetooth device to select the Next or
Previous track.
3. Slowly adjust both the volume controls (5) of the unit and your Bluetooth device until you
reach a comfortable listening level.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled
devices for Bluetooth operation since it may vary from model to model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play the music
through the speaker, even if paired (linked).
3. Remember to turn off the unit when you have finished listening,
4. Don't forget to switch off the power of your Bluetooth device as well.
5. The music playback will automatically be paused when you have an incoming call. When
the call is ended, the unit will start playing again.
Phono
Noted:
-
Remove the stylus protector.
-
Be sure that the tone arm is being detached from the tone arm rest
before operating and re-secured again afterwards.
1. Turn the volume knob (5) to switch on the system and the Bluetooth/Power LED indicator (4)
is on with flashing blue light.
2. Set the speed selector (8) to the proper position depending on the record to
be played.
3. Place the record on the platter (use the spindle adaptor (7) if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The
platter will start to rotate and the Power LED indicator (4) will change to red
color.
5. Place the tone arm to the desired position of the record.
6. Adjust the volume (5) to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm from the
record and return it to the rest (9).
8. To stop manually, lift the tone arm from the record and return it to the rest (9)
