6
Remark
:
1. As some kind of record the auto-stop area was out of the unit setting, so it will stop before the
last rack finish. In this case, select the auto-stop switch (11) to “ off “ position, then it will run
to the end of the record but will not stop automatically (turn off the unit by power button or
switch back the auto-stop switch (11) to “ on “ position to stop the platter rotate). Then put
back the tone arm to the rest position.
2. Remember to disconnect all the Bluetooth device with the unit when you operate the phono.
Line out connection
You can connect the system to your whole hi-fi system by connecting the line out socket (10) to
the auxiliary input socket with a RCA cable (not included).
Care and Maintenance
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use
caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
SPECIFICATIONS
AC Power: AC 120V ~ 60Hz
Bluetooth
Maximun communication range: Line of sight approx. 10m (30 feet)