6.0 Production
Page 6.7
Production for 548.10 G \ 05.2007 \
If a circuit board remained inside the system, e.g. got stuck in
the conveying system, you can open and close the system cover
and the cover of the heating chamber.
Attention, danger of burns
During the production process, the heating chamber is very
hot due up to 525°C (980 °F). In case of burns contact a
physician immediately.
Attention, danger of burns
Before you remove a circuit board from inside the sy stem,
make sure you wear heat-resistant gloves. The circuit
board may be very hot and cause burns.
\
Turn the system off by the main switch.
\
Let the system cool down.
\
Unsecure the machine cover with the 4-key.
\
Open the machine cover.
\
Open the heating chamber.
\
Remove the circuit board carefully from the open hea-
ting chamber.
\
Close the heating chamber.
\
Close and secure the machine cover.
Open Covers
Close Covers
The circuit board remained inside the system
Summary of Contents for 548.10
Page 134: ...Page 12 1 12 0 Notes ...
Page 135: ...Page 12 5 12 0 Notes ...