7.0 Measurement
Page 7.4
Measurement for 548.10 G \ 05.2007 \
\
Mount the sensor on the PCB.
\
Place the PCB and the measuring sensor adapter on
the transport system.
\
Connect the plug of the sensor with the socket
(3)
on
the feeding side of the system.
\
After the PCB moved into the heating chamber press
<Measure>
,
to start the recording.
Record a Process
Curve
The following screen appears.
Display Save Measure Print
MEASUREMENT
>> 01 Löten <<
02 Kleben
03 - -
04 - -
05 - -
Attention
The transport system moves through the extremely hot
hea ting cham ber. Do not reach into the heating chamber
during operation. Use heat-proof protective gloves.
\
With
<Enter>
you can stop the recording.
The process curve is saved on the place "0" with the
name"Actual".
You will proceed back to the screen of process cur-
ves.
Please note, that the recorded process curve is saved on
the place "0" with the name"Actual". If you want to keep the
process curve you must save it on another place before.
Summary of Contents for 548.10
Page 134: ...Page 12 1 12 0 Notes ...
Page 135: ...Page 12 5 12 0 Notes ...