Page 9.19
9.0 Maintenance and service
Maintenance 551_15 \ 1
1.2014 \
Cleaning of the
guiding rails
Cleaning of the
chamber floor
Cleaning of the
mesh belt
y
Clean the guiding rails, the chamber floor and the mesh
belt with a brush and a vacuum cleaner. All accessible
parts can be cleaned with a cloth and soap water or spiritus
in case of rough contaminations.
y
After cleaning and checking all components you can close
the hood carefully again.
Therefore loosen the locking of the hood rests bei opening
the hood completely again. Then close the hood slowly and
carefully.
y
Secure the hood against unallowed opening with the hexa-
gon socket screws.
It makes sense to clean the chamber floor, guiding rails and mesh belt
together with the heating modules.
y
Therefore lift all modules on after another as described
before to get access to the components underneath.
WARNING
Risk of burns due to high temperatures
Some parts inside the soldering system can reach temperatures
up to 500°C during operation.
y
Conduct cleaning work only with cooled down heating
chamber.
WARNING
Risk of injuries due to electricity / rotating fans
y
For service and maintenance work you have to switch off
the oven according to the instructions and to disconnect
the mains plug.
y
Then you can open the machine hood.
Summary of Contents for 551.10
