7
5.4.1 Factory Mode:
The factory is responsible for the test and calibration
5.4.2 User Mode:
Press the
λ + Light key
synchronously, and then enter the
User mode. A sign "T" will be displayed at the left side of the display. Press
the
λ + Light key
synchronously once again, it exit from the User mode and
enter the Working mode. (the T sign will disappear).
Function
Button
―――
Plus 0.05
Light
―――
Minus 0.05
dB
―――
Store
Zero
―――
Switch Wavelength
λ
―――
Return to the Factory
Setting
λ+ Zero
―――
Notes:
If any errors or mistakes caused by the user self-calibration operation,
please press theλ+ Zero synchronously under the user mode to go back to the
factory setting.
(1)
Auto-off :
Press
LIGHT + dB key
to turn on the auto-off function. The
auto-off symbol will be displayed on the top right. The unit will be turn off
automatically after 10 minutes idle time.
(2) Background light On/Off:
Under the Working Mode, press LIGHT to turn
the background light On/Off. A little sun symbol will be displayed on the
top right.
