15
Safety Information
To ensure safe operation and service of the
Tester, follow these instructions.
Failure to observe warnings can result in
severe
injury
or
death.
-
Avoid working alone so assistance can be
rendered.
-
Do not use test leads or the Tester if they
look damaged.
-
Do not use the Tester if the Tester is not
operating properly or if it is wet.
-
Use the Clamp Meter only as specified in
the Instruction card or the protection by
the Clamp Meter might be impaired.
-
Individual protective device must be used
if hazardous live parts in the installation
where the measurement is to be carried
out could be accessible.
-
Use caution with voltages above 30 V ac
rms, or 60 V dc. These voltages pose a
shock hazard.
Symbols as marked on the Tester
and Instruction card
Risk of electric shock
See instruction card
Equipment protected by double or
reinforced insulation
<
Battery
Earth
Conforms to EU directives
Do not discard this product or throw
away
E
Application around and removal from
hazardous live conductors is
permitted
Summary of Contents for MW3036
