10
REMOTE CONTROL PREPARATION
Battery Installation
Service life of batteries
Notes:
Insert the batteries while observing the positive
(+)
and Negative (-) polarities as Figure A.
The batteries normally last for a year although
this depends on the operation and on how often
the remote control is used.
If the remote control unit fails to work even when
it is operated near the player, replace the
batteries with new ones. Use size AAA UM-4
batteries (2 pieces).
Do not use rechargeable (Ni-Cd) batteries.
Install batteries correctly observing the (+/-)
polarity signs.
Do not drop, step on the remote control,
otherwise it may damage the parts or lead to
malfunctioning.
Use only the recommended battery type or
equivalent (voltage and size).
Always replace a complete set of batteries at
the same time.
Do not mix batteries of different types.
Never mix new and used batteries in the same
compartment.
Remove exhausted batteries immediately.
Remove batteries when product is not in use.
Do not dispose of batteries in fire as they may
explode.
Do not recharge non-rechargeable batteries.
Do not short circuit the supply terminals.
Ensure batteries are stored away from metal
objects as contact may cause a short circuit.
Remote control operation range is no more
than 5 m from and within about 60 degree wide
in front of the unit (Figure B).
Do not place the batteries under the direct
sunlight or near sources of excessive heat.
Do not point bright lights to the remote control
sensor.
Do not place objects between the remote
control and the remote control sensor.
Do not use this remote control together with the
remote control of any other equipment.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Remoto control sensor
A
B
Among 5 meters
30
30
DP 800
DP 800
