10
Ver. 1.0
SHIN HWA Eng.Co.,Ltd.
MOTOR CYLINDER
MS1K~MS1T, M1K~M50T
Potentiometer Type
Position Limit Switches
Potentiometer
Terminal Block
Housing
Motor with Brake
Brake Release Devic e
Dustproof Bello ws
Cylinder
Piston Rod
Knuc kle Joint
Coil Spring
Thrust Limiter Unit
Gears
Manual Rotation Shaft
Gear Head
Cam Ac tuating Ring
Potentiometer
Terminal Bloc k
Position Limit Switc hes
Grease Nipple
The P series was developed for precise position
control of the damper and can also be used for
compression suspension.
Reduction Gears : The standard product is configured
as a two stage reduction gear.
The high speed part uses a helical gear, and the low
speed part uses a spur gear to ensure forward and
reverse operation and sufficient life.
Thrust Limiter Unit : With the action of the compressed
spring and limit switch, it can be safely stopped at any
position in both directions in case of overload.
Linear Safety Device : It is a device that moves the
rod in a straight line by the rotational force of the
screw.
Since it is assembled firmly, it can be used without
failure by periodic grease injection.
Position Control Device : The open / close angle
signal is detected by the rotation of the potentiometer,
and the combined cam can control the open / close
position by operating the limit switch.
