67
04/2020
4 PREPARING THE DEVICE
4.1 Unpack
1. Carefully unpack the device. Follow the instructions for
disposal of packaging materials in chapter 9 – DISPOSAL.
2. The device may be protected for transport with transport
locks. Remove these completely. Do not use aggressive
cleaners to remove remains of the transport locks.
3. Before connecting the device, check that the power cord
or the device itself have no damages.
4. Check if content comprises all equipment parts, see chap-
ter 2 – CONTENT.
5. Make sure that the device is disconnected from the power
supply.
4.2 Selection of suitable location
Set up the device in a suitable place:
• for charging purpose place near a safety socket with 10 A
minimum protection
• horizontal and vibration-free
• heat resistant
• surface does not react with the rubber ring of bottom part
• with a minimum distance of 10 cm around the device
• with an appropriate distance to extreme heating sources (>1m)
4.3 Cleaning the device
WARNING!
RISK OF ELECTRICAL SHOCK!
The device must be disconnected from
mains before each cleaning.