14
v i d e o r e c o r d e r
Setting up the
Auto-set (continued)
If you do not see the auto-set picture when you switch on the video
recorder in step 2 above, your video recorder has probably already
been tuned in to some television programmes.
To start auto-set again, press the MENU button until the main
menu appears.
• Press the PR- button once. This moves the pointer to ‘PR preset’.
• Press the OK button to see the programme pre-set menu.
The pointer will be on ‘Auto Set’.
• Now go to step 3 above.
5 Press the OK button to confirm the
recommended PR.
PLEASE CHANGE THE TV
PR TO 54.
IMPORTANT!
6 To allow you to use VI it is important
that the programmes are stored in standard
order - BBC1 on programme number one, BBC2
on programme number two, ITV on programme
number 3, Channel 4 or S4C on programme
number four, Channel 5 on programme number
five and so on. Check they are in the right
order by looking at the picture opposite, which
will appear after sorting has finished. If the
programmes are not in the right order, please
read ‘Changing programme numbers’ on page
16 after you have finished step 7 below.
7 Press the MENU button to finish.
MENU
MANUAL SET
PR01 BBC1 PR08 SKYS
PR02 BBC2 PR09 MTVE
PR03 ITV
PR10 P-10
PR04 CHA4 PR11 P-11
PR05 SKY1 PR12 ----
PR06 SKYN PR13 ----
PR07 SKYM PR14 ----
When you can’t get the Auto-set picture
PR+/-:SELECT
OK:CONFIRM MENU:END
PR PRESET
AUTO SET
MANUAL SET
CANAL+ SET
PR ERASE
PR ALIGN
PR+/-:SELECT
OK:CONFIRM MENU:END
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM MENU:END
