background image

23

v i d e o   c a s s e t t e s

P L A Y I N G

Still picture and slow-motion

Still picture

While you are playing a cassette, press the  

(pause) button to

see a still picture. 
Each time you press the pause button, the picture will move on one step.
• You can reduce vertical vibration of the still picture if you keep

pressing PR- or PR+ button.

Slow-motion

While you are playing a cassette keep pressing the 

button to

control the slow-motion speed in 6 steps.

As with the still picture, you will get some picture interference. 
• If you see interference stripes during slow motion playback, keep

pressing the PR+ or PR- button until you get the best picture.

VCR

• If still picture or slow-motion lasts longer than five minutes the video recorder will stop, to

protect the video tape.

Commercial skip

If you press the 

button on the remote control while a cassette is playing, the video

recorder quickly skips 30 seconds of the recording.

30

NTSC playback

NTSC is American standard video. Great Britain uses a different video standard (called PAL). This
video recorder can play video cassettes that have been recorded with NTSC video through most
televisions used in Great Britain. A few televisions may not display a proper picture.  This is not a
fault with your video recorder and the television cannot be modified. You cannot record NTSC video
on this video recorder.

VCR

When the video recorder is playing a hi-fi recording you can press the A.SEL button to change the
sound track. The following messages on the screen tell you what sound track you have selected.

hi-fi L+R :  normal stereo                    
hi-fi LEFT:  the left channel comes from both the left and right speakers 
hi-fi RIGHT:  the right channel comes from both the left and right speakers
hi-fi OFF:  lower quality mono sound track 

If the recording is not hi-fi you cannot change the sound track, there is no on-screen message, and
the video recorder can only play mono sound.
You need to select ‘hi-fi L+R’ to get proper surround-sound effects from a surround-sound effect
amplifier.

Choosing the sound track

Summary of Contents for VCR5360GB













































Reviews: