background image

30

R E C O R D I N G

Recording from other equipment

Select the video channel on your television so you can monitor the recording.

Recording through the aerial cable

Please read ‘Connecting extra equipment - Through the aerial cable’ on page 11. Press the
PR+ or PR- button to select the video recorder programme number that you have tuned to that
piece of equipment, then record as usual. 

Recording through the scart cable

If the equipment is connected with a scart cable, press the AV button on the remote control
to make ‘AU1’ or ‘AU2’ appear in the video recorder display panel. ‘AU1’ means the lower
scart socket (EURO AV1) is being used for the recording. ‘AU2’ means the upper scart socket
(EURO AV2/ DECODER) is being used for the recording. After a few seconds, ‘AU’ will change
to either the time or the tape counter, depending on whether or not you selected the tape
counter with the information display button

.  You can check again that you have selected

the AV channel by using the information display button (please see ‘On-screen information
display’ on page 26).

Change back to programme numbers by pressing the AV button until a ‘PR’ number appears
briefly in the video recorder display.

Recording through the front input sockets

Camcorders and similar equipment can be connected to the front AV (audio / video) input
sockets of the video recorder. Press the AV button on the remote control twice until ‘AU F’
appears in the video recorder display panel. After a few seconds, ‘AU F’ changes to either the
time or the tape counter, depending on whether or not you selected the tape counter with the
information display button. You can check again that you have selected the AV channel by
using the information display button (please see ‘On-screen information display’ on page 26).
Change back to programme numbers by pressing the AV button until a ‘PR’ number appears
briefly in the video recorder display.

•  

‘AU’ on the video recorder display appears as ‘AV’ on the television picture.

Protecting cassettes from being recorded over

Please see page 21.

‘AU’ on the video recorder display appears as ‘AV’ on the television picture.

Summary of Contents for VCR5360GB













































Reviews: