32
R E C O R D I N G
One-time recording (OTR)
One-time recording lets you set the video to record for between half an hour and 10 hours.
1 Put in a cassette and choose a programme or the other equipment
you want to record from, as described under ‘Recording’ on page
29.
2 Press the RECORD/OTR button on the video recorder or the record
(red dot) button on the remote control once, then once more for
every 30 minutes you want to record. You can record for up to 10
hours if there is enough tape on the cassette.
◆
The video recorder display confirms the recording time. For example, ‘R1:30’
in the video recorder display panel means the recording will last for one hour
and thirty minutes. This time reduces as the recording is made.
◆
A red ‘TMR’ in the display panel shows that a timed recording is running.
◆
If the cassette reaches its end, it will just stop.
◆
You can stop timed recording by pressing and holding the
(stop) button
for at least five seconds, until ‘TMR’ and the recording time (R-:--) go off the
display.
VCR
TMR
