36
r e c o r d i n g s
P r o g r a m m e d
Setting the timer (continued)
10 Press the OK button to confirm the timer programme. The video
timer is now set. The information has been stored in a timer block.
• If you have set the video to start recording a second programme,
before the first programme has finished, you will get a warning
and the video recorder will go back to step 6.
11 Put a cassette (with a safety tab) into the video recorder. Switch
the video recorder to stand-by with the POWER button or the
button. ‘TMR’ will light up red in the video recorder display.
• The video recorder will only make the recording if it is switched
to stand-by with the POWER or
button.
1. INSERT THE CASSETTE.
2. TURN THE VCR OFF.
Changing a timer programme
1 Follow steps 1 to 3 above.
2 Press the PR+ and PR- buttons to move the pointer to the line
for the timer programme you want to change.
3 Follow steps 7, 8 and 9 above to select and change (rather than
fill) entries in the timer programme.
4 Finish with steps 10 and 11.
How to erase a timer programme
1 Switch your television on and select the video channel.
2 Press the MENU button once.
3 Press the OK button to get the timer programme review display.
4 Press the PR+ and PR- buttons to move the pointer to the timer
programme you want to erase.
5 Press the OK button. The video recorder will display the timer
programme information shown opposite.
6 Press the ‘0’ button.
7 The video recorder will display a warning message. You can
change your mind and go back by pressing the MENU button.
8 Press the OK button to erase the timer programme and return to
the programme review display.
9 Repeat from step 4 to erase more timer programmes.
10 Press the MENU button twice to turn off the menu displays.
TIMER PROGRAM (ONCE)
PR
03
START TIME
21:20
END TIME
22:20
START DATE
14/10(SAT)
TAPE SPEED
SP
PDC
ON
0 :ERASE
/
:CORRECT MENU:END
PR03 P-03
IMPORTANT!
THE ‘OK’ BUTTON WILL
ERASE THIS PR.
:PR VIEW
OK:CONFIRM MENU:END