「
Mushiking#2-eng.doc
」
最終印刷日時：
2010/01/14 14:18:00
7/17
FIG. 10a
1) Power switch off.
2) SPEAKER VOLUME
3) POWER SWITCH
4) DEMAGNETIZER BUTTON
5) TEST BUTTON
6) SERVICE BUTTON
Coin Meter
The Coin Meter counts the number of coins inserted into the coin slot.
Open the Cashbox Door by using the key to have the Coin Meter appear underneath the Cashbox.
FIG. 10b
1) CASH BOX
FIG. 10c
1) COIN METER
(P. 34)
10-2 SYSTEM TEST MODE
(STOP)
IMPORTANT
●
The settings changed in Test Mode are stored when Test Mode is ended using
EXIT in the menu mode. If the power is turned off before Test Mode is finished, the
setting changes do not take effect.
●
Executing BACKUP DATA CLEAR in System Test Mode does not clear the
bookkeeping data in Game Test Mode.
●
Entering Test Mode clears fractional number of coins less than one credit and
bonus added data.
System Test Mode can be used to check IC Board functioning, adjust the monitor, and change coin settings.
Refer to the NAOMI Service Manual for details. However, be sure to employ the settings outlined below
for this product.
●
CABINET TYPE
：
1 PLAYER (S)
●
MONITOR TYPE
：
HORIZONTAL
●
COIN CHUTE TYPE
：
COMMON
