「
Mushiking#3-eng.doc
」
最終印刷日時：
2010/01/14 14:19:00
14/17
--------------------------------------------------------------------------------------------------------
Incorrect power source/voltage.
Make sure that the power supply/voltage is correct.
--------------------------------------------------------------------------------------------------------
The Circuit Protector malfunctions due to a power surge.
After eliminating the cause of the power surge, restore the
Circuit Protector of the AC Unit. (See next page.)
-------------------------------------------------------------------------------------------------------------------
Sound is not emitted.
--------------------------------------------------------------------------------------------------------
Sound volume adjustment is not correct.
Adjust the switch unit’s sound adjustment volume control.
--------------------------------------------------------------------------------------------------------
Sound-related circuit malfunction.
Perform SOUND TEST.
-------------------------------------------------------------------------------------------------------------------
Cards are not dispensed.
--------------------------------------------------------------------------------------------------------
Cards are empty.
Refill cards.
--------------------------------------------------------------------------------------------------------
Card jam.
Remove the jammed card(s).
--------------------------------------------------------------------------------------------------------
The connector is not connected properly.
Ensure proper connection.
--------------------------------------------------------------------------------------------------------
Card dispenser malfunction.
Exchange the card dispenser.
-------------------------------------------------------------------------------------------------------------------
Cannot scan (read) cards.
--------------------------------------------------------------------------------------------------------
Card reader card slot is dirty.
Use the attached cleaning card to clean the card slot.
--------------------------------------------------------------------------------------------------------
The connector is not connected properly.
Ensure proper connection.
--------------------------------------------------------------------------------------------------------
Card reader malfunction.
Exchange the card reader.
-------------------------------------------------------------------------------------------------------------------
Cannot enter TEST MODE.
--------------------------------------------------------------------------------------------------------
Switch malfunction.
Exchange the switch.
--------------------------------------------------------------------------------------------------------
Game Board abnormality.
Exchange the Game Board.
--------------------------------------------------------------------------------------------------------
The operation used to change to TEST MODE is incorrect.
Ensure correct operation.
-------------------------------------------------------------------------------------------------------------------
Monitor display is abnormal.
--------------------------------------------------------------------------------------------------------
Game Board and monitor connection failure.
Ensure proper connection (of connector).
--------------------------------------------------------------------------------------------------------
Monitor malfunction.
Exchange the monitor.
--------------------------------------------------------------------------------------------------------
Game Board malfunction.
Exchange the Game Board.
-------------------------------------------------------------------------------------------------------------------
There is no response from control panel buttons.
--------------------------------------------------------------------------------------------------------
Button failure.
Exchange the button(s).
