9-1
SWITCH UNIT AND COIN METER
Never touch places other than those speci
fi
ed. Touching places not
speci
fi
ed can cause electric shock and short circuit accidents.
Make sure that the prop is
fi
rmly in place before start-
ing any work. If the prop comes loose the control panel
may close causing an accident.
Adjust the sound to the optimum volume, taking into consideration the environmental requirements of the installation location.
Removing the Coin Meter circuitry renders the game inoperable.
SWITCH UNIT
1) Open the Upper Coin Door.
2) Opening the control panel will expose the switch unit.
TEST Button (TEST):
Enter TEST Mode. Once in TEST Mode this button becomes the con
fi
rm
button.
SERVICE Button (SERVICE):
Used to award service (free) credits without opening the coin meter. Once
in TEST Mode this button becomes the select button.
SOUND VOLUME Switch (SOUND VOLUME):
Used to adjust the volume. Turn to the right to increase the volume.
COIN METER (COIN METER):
Left and Right.
PHOTO. 9.1a
UPPER
COIN DOOR
SERVICE BUTTON
SOUND VOLUME SWITCH
TEST BUTTON
PHOTO. 9.1b SWITCH UNIT
COIN METER
COIN METER
Make sure that the control panel support is
fi
xed
fi
rmly
in place before performing any operations. Closing
the control panel with the support loose may lead to
accidents.
Be careful not to trap your
fi
ngers when closing the
control panel.
The details of changes to Test Mode settings are saved
when you exit from Test Mode by selecting EXIT from
the SYSTEM TEST MENU. Be careful because if the
power is turned off before that point, changes to the
settings will be lost. Use with the speci
fi
ed settings. If
settings other than those speci
fi
ed are used, inappropri-
ate operations or malfunction may occur.
System Test Mode can be used to check the information or the operation of the LINDBERGH board, adjust Monitor color, and perform coin/credit settings.
Press the TEST Button after powering on the unit to display the following SYSTEM TEST MENU.
SYSTEM TEST MENU
SYSTEM INFORMATION .......................................... a
STORAGE INFORMATION
............................... b
JVS TEST
................................................................ c
MONITOR TEST
..................................................... d
SPEAKER TEST
..................................................... e
COIN ASSIGNMENTS
.......................................... f
CLOCK SETTING ..................................................... g
NETWORK SETTING
.......................................... h
GAME TEST MODE
.......................................... i
EXIT
SELECT WITH SERVICE AND PRESS TEST
->
Use the SERVICE Button to move the cursor to the desired test item. Press the
TEST Button to enter the selected item.
Press the TEST Button when GAME TEST MODE is selected to change to the
Test Menu speci
fi
c to this game.
Refer to the section “9-3 GAME TEST MODE.”
After the test is complete, move the cursor to EXIT and press the TEST Button
to return to the Game Advertisement screen.
21
9-2 SYSTEM
TEST
MODE
