20
This test checks the input devices.
Using this screen, check the input devices periodically.
Pressing the TEST and SERVICE Buttons together returns you to the Game Test
Menu Screen.
INPUT TEST
1P_START :OFF 2P_START :OFF
1P_ABUTTON:OFF 2P_ABUTTON:OFF
1P_BBUTTON:OFF 2P_BBUTTON:OFF
TEST-SW :OFF SERVICE-SW:OFF
1P_LEVER:(80,80) 2P_LEVER:(80,80)
1P_BAT : 80 2P_BAT : 80
PRESS TEST AND SERVICE BUTTON TO EXIT
INPUT TEST Screen
a. INPUT TEST
Operate each of the input devices. If the indication at the right of the device label
changes from OFF to ON, the device is normal.
LEVER and BAT indicate the lever and batting switch volume control values,
respectively. Check whether each of the values changes and the cursor moves
smoothly according to the lever or batting switch operations you make.
• Lever and batting switch settings
LEVER:Check that, when you move the lever fully to the top, bottom, left, or
right, the cursor, marked by a circle (Åõ) in the figure, moves securely
from an end to another in the frame while the value below the frame is
changing.
BAT:
Check that, when you move the batting switch fully from an end to
another in the movable range, the cursor, marked by horizontal bars in
the figure, moves securely from the top (or bottom) to the bottom (or
top) while the value below the frame is changing.
If the cursor does not move from an end to another, retry to set a proper value
with VOLUME SETTING and then perform the recheck on this Test Screen.
Summary of Contents for Universal Kit
Page 4: ...2 ASSY CTRL PNL 2A4B2S MB2K2 ENG NOA 20010 01 D 1 2...
Page 34: ......
Page 35: ...VISIT OUR WEBSITE...
Page 36: ......
