Instructions for Installation of Handlebar Bag
Step 1
The Segway 12.0 Handlebar Bag has two handles. While holding
one of the handles in each hand, place the bag above the
handlebar with the large volume compartment facing forward.
(see picture)
Step 2
Wrap the control shaft cuff around the control shaft and engage
the hook and loop closure.
Step 3
Drape the bag over the handlebar so that the large volume
compartment is forward and the back flap with pockets is facing
the rider platform. Align the bag so that the display and key port
are centered within the handlebar window.
Step 4
Press the back flaps against the back of the large volume
compartment to engage hook and loop closures. Pull the side
tabs around the back flaps and engage the hook and loop
closures. Adjust the control shaft cuff if necessary.
>
Questions?
If you are missing a part, or if you need to return the product, please contact Segway Customer Service at
866.4SEGWAY (866.473.4929) or www.segway.com/support/contact_us.html.
Thank you.
LIMITED WARRANTY
The Segway 12.0 Handlebar Bag is an accessory covered by the Segway
TM
Human
Transporter Limited Warranty (copy delivered with this kit).
