Golf Bag Carrier Instructions for Installation and Operation
©2006 Segway LLC
Page 4 of 7
18592-00001 ab
Step 8
Thread two 35mm hex fasteners with washers
through the holes in the Cap and Frame , into the
threaded brass inserts in the Support. Tighten with
a 5mm hex wrench. Torque to 7.5 N-m.
Step 9
Attach the Golf Bag Holder.
a.
Orient the Golf Bag Holder so the tube fitting at the
end of the swiveling extension arm is aligned with
the forward opening in the right side of the Frame,
and the other tube fitting is aligned with the rear
opening. (It may help to tip the Segway HT onto
the left Wheel.)
b.
Insert the two Golf Bag Holder tube fittings into
the two Frame openings. Keep the Golf Bag Holder
level as you press both fittings all the way into the
openings.
Step 10
Secure the front and rear tube fittings firmly into
the Frame by using 5mm hex wrench to tighten the
bolts.
forward opening
rear
opening
