16
Programming an InfoKey
Changing an InfoKey
Use the
ChANGE
function and complete the following steps to change the configuration of an InfoKey.
1
Start the InfoKey Programming Tool and log in.
The system displays the
Take the InfoKey to be modified
and place it in the fixture
window.
2
Insert the InfoKey to be modified into the programming
fixture and click
CONTINUE
.
3
From the
Main Menu
click
ChANGE
. The system displays
the
Reading InfoKey Configuration
window.
3
(Cont
inue
d)
When the reading is complete, the system displays the
current InfoKey configuration.
Note: The units of measure display (MPH or KM/H) on the
Change
screen is determined by the regional settings on your PC. Refer to the
FAQ section for more information.
4
Change the InfoKey configuration settings as follows:
Top Speed (MPh):
Click in this field and enter a top speed
for Standard Setting speed limit. If the value is outside the
available range, the system displays a message with the
range of possible values (4.0 to 12.5 MPH).
Summary of Contents for InfoKey
Page 1: ...InfoKeyProgrammingTool GUIDE 22081 00000aa ...
Page 32: ......
