background image

Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not 

discard or destroy the battery. For more battery information, refer to the sticker on the battery itself, located 

on the bottom of the miniPRO. Refer to your local laws and regulations regarding battery recycling and/or 

disposal.

A well maintained battery can perform well even after many miles of riding. Charge the battery after each 

ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery 

range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease 

range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). 

Battery range will recover when temperature rises. More details are available in the App.

NOTE

Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power 

battery should retain charge for 30-60 days in Standby Mode. Remember to charge the battery after each 

use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the 

battery record the charge-discharge condition of the battery; damage caused by over-discharge or 

under-discharge will not be covered by the Limited Warranty.

     WARNING

Risk of fire. No user serviceable parts. Do not attempt to disassemble the battery.

     WARNING

We strongly recommend against riding when the ambient temperature is below 23°F (-5°C) because low 

temperature will limit the maximum power/torque. Doing so could cause personal injury or property 

damage due to slips or falls.

Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush 

and toothpaste, then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with extra 

fine grit abrasive paper.

NOTE

 

Do not wash your miniPRO with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These 

substances may damage the appearance and internal structure of your miniPRO. Do not wash your 

miniPRO with a power washer or high pressure hose. 

     WARNING

 

Make sure the miniPRO is powered OFF, the charging cable is unplugged, and the rubber cap on the 

charge port is tightly sealed before cleaning; otherwise you may expose yourself to electric shock or 

damage the electronic components.

Store your miniPRO in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to 

sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic 

components and may reduce battery life.

Tire Pressure

 

Inflate tires to 45

50 psi. Inflate both tires equally.

14

15

12 

Maintenance

Cleaning and Storing Your miniPRO 

Battery Pack Maintenance

Summary of Contents for miniPro













Reviews: