08
09
6
Charging
The storage compartment is water resistant but not waterproof, and it cannot prevent extensive rain or
water from entering.
Your Smart is fully charged when the LED on the charger changes from red (charging) to green (trickle
charge).
7
Using the Storage Compartment
Opening and Closing: to open, first press the button, then pull off the cover; to close, insert the bottom
of the cover first, then press closed until it clicks.
Using: stow the remote control or gimbal camera inside the storage compartment, as shown. Use the
retaining strap to hold the item securely.
1.
2.
3
1
2
Install App and register/login.
Power ON the Smart. The Bluetooth icon
blinking indicates the Smart is waiting for a
connection.
Click “Search device” to connect to your
Smart. The Smart will beep when the
connection is successful. The Bluetooth icon
will stop blinking and remain illuminated.
When your Smart intermittently sounds an alarm, stop riding and check the App for details.
Do not connect the charger if the charge port or charge cable is wet.
Charge port
Open the rubber cap
CHARGING
Insert the plug
into the socket
1
2
Camera
Remote
